| |
|
| | 采用凸三边形刀片，刀片刃倾角为6°，装在刀体上为3°，适用于直角阶台轴的外圆粗车或半精车。
|
| Convex triagle insert with angle 6°, is placed on the cutter with angle 3°. It is suitable for un-accurate or semi-accurate lathe with straight axle and round outside. |
 |
|
|
|
|
| Kr90o normal indexing lathe cutter shape of round outside (wedge pin mode) |
| 按GB/T5343.2-93标准 Meets GB/T5343.2-93 |
|
| |
|
|
|
|
采用正三边形刀片，副偏角为8°，装在刀体上3K10，3K13刃倾角为0°，3K16，3K19刃倾角为-3°。适用于直角阶台轴的外圆粗车或半精车。
|
| Regular triangle insert, with side angle 8°, is placed on the cutter, with angle 0°for 3K10 and 3K13, with angle -3°for 3K16 and 3K19. It is suitable for un-accurate or semi-accurate lathe with straight axle and round outside. |
 |
|
|
|
|
Kr92o normal indexing lathe cutter for surface using (wedge pin mode)
按GB/T5343.2-93标准 Meets GB/T5343.2-93 |
|
|
|
采用带８°副偏角的正三边形刀片，主要用于端面，直角台阶和端平面车削。 |
| A regular triangle insert, with side angle 8°,is equipped for the cutter. It is suitable for cutting surface, straight table or side surface. |
 |
|
